If you have a fire or water emergency, please call us now at (239) 334-8700

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

The Importance of Containment During Mold Remediation

7/25/2019 (Permalink)

equipment in floor The air scrubber is a large HEPA filter used to clean the air in the room as work is being completed

Protect Your Building, Workers and Customers

Mold cleanup in a commercial building is a potentially massive undertaking that depends heavily on proper containment to prevent further mold contamination. Failure to adequately contain the affected area risks exposing the entire facility to the infestation. However, if further contamination occurs, the fault and liability likely rest with the contractors trusted for the cleanup. While that might be a relief, as your concern is on the welfare of your establishment, it still pays to understand containment procedures, so you know if your facility is being put at higher risk. Containment consists of three essential components that if followed, protect your building, workers and customers.

1. Plastic Sheeting

The first thing every containment process likely begins with is plastic sheeting. A remediation team will come in, likely in protective suits, and put up sheeting all around the room, paying particular attention to doorways and windows and attempting to get a tight seal around the space. This seal prevents the spread of mold spores as the surface areas are disturbed.

2. Tape

Also, during the sheeting phase of the mold cleanup, the workers will tape off areas like vents, holes, ducts and seams. Taping off these areas ensures that any spores will not find a new home somewhere else in your building. Particular attention will probably be paid to ductwork because the air currents moving through an HVAC system can lead to a widespread disaster.

3. Monometer and Air Scrubbers

Last, you may notice a couple of unique devices being installed in the affected area: a monometer and an air scrubber. A monometer is used by many mold remediation services in the Buckingham,FL, area, and it is used to prevent the buildup of negative pressure in a space, which can lead to a failed containment area. The air scrubber is a large HEPA filter used to clean the air in the room as work is being completed.
Mold cleanup in commercial facilities can be a significant undertaking, but the success of that endeavor rests in the proper containment of the affected area. Don't put your building at risk. Contain and remediate any mold problem quickly and thoroughly.

Other News

View Recent Posts